PRODUCTS & SERVICES
Everything the site burns through, held close to the face.
Mining, processing and site-services consumables and systems — chosen from your ore, plant and fleet data, and held on site or at the nearest critical location.
01 / Products & Solutions
Two ranges, a procurement service and one searchable catalogue.
Start with the range, or search every line below.
- Industrial Consumables — Technical and non-technical consumables for pit, plant and workshop
- Engineering Solutions — Blast engineering, telemetry, fleet tracking, workshops and security
- Procurement & Supply Chain — Data-driven sourcing, route intelligence, near-site hubs and trade finance
02 / Product catalogue
Search every line we supply.
Filter by offering or category, open the full spec sheet, or add lines straight to your quote.
| SKU | Product | Category | Specification |
|---|---|---|---|
| DRL-BTB-101 | Button bits | Drill & Blast Consumables | Tungsten carbide buttons (ballistic, spherical or semi-ballistic); 64–152 mm; R32, T38, T45, T51, GT60 threads; retrac or standard skirt |
| DRL-CRB-102 | Cross & retrac bits | Drill & Blast Consumables | Cross-insert or retrac skirt carbide bits for broken ground; diameter and thread specified to your rigs |
| DRL-DTH-103 | DTH hammers | Drill & Blast Consumables | Down-the-hole hammers for high-pressure rigs; hammer class and shank matched to bit and compressor |
| DRL-DTB-104 | DTH bits | Drill & Blast Consumables | Flat, concave or convex face DTH bits; 90–254 mm; button grade to rock abrasivity |
| DRL-ROD-105 | Rods, tubes & shanks | Drill & Blast Consumables | MF rods, guide tubes and shank adapters; R32, T38, T45, T51, GT60, ST58 threads |
| BLS-ACC-106 | Blasting accessories | Drill & Blast Consumables | Stemming plugs, borehole liners, gas bags, connectors and downline hardware sized by hole diameter |
| DRL-RGD-107 | Bit regrind | Drill & Blast Consumables | Manual or semi-automatic bit grinders, button gauges and regrind programmes |
| BLD-DES-201 | Blast design | Blast Design & Deviation | Pattern, timing and charge design delivered as design file and charge plan |
| BLD-SRV-202 | Deviation surveys | Blast Design & Deviation | Probe and gyro measurement of collar, dip and azimuth; 3D hole traces, deviation % and collar error |
| BLD-TLS-203 | Deviation tools | Blast Design & Deviation | Borehole survey probes and gyros for in-house crews; sale or hire |
| BLD-FRG-204 | Fragmentation analysis | Blast Design & Deviation | Image-based muck-pile sizing with size distribution (e.g. P80) |
| BLD-VIB-205 | Vibration & airblast monitoring | Blast Design & Deviation | Seismograph networks with compliance report per blast |
| BLD-RPT-206 | Design-vs-actual reporting | Blast Design & Deviation | Drill and blast KPI dashboards; CSV and DXF export |
| HYD-SPH-301 | Spiral hose | Hydraulics & Hoses | 4- and 6-wire spiral high-pressure hose; 1/4"–2" ID; rating to the circuit |
| HYD-BRH-302 | Braided hose | Hydraulics & Hoses | 1- and 2-wire braided hose; 1/4"–2" ID |
| HYD-FIT-303 | Fittings & adapters | Hydraulics & Hoses | Crimped fittings and adapters to OEM specification (JIC, ORFS, BSP, flange) |
| HYD-ASM-304 | On-site assembly | Hydraulics & Hoses | Container-based crimping stations with same-shift hose builds |
| HYD-CYL-305 | Cylinders, pumps & seals | Hydraulics & Hoses | Repair, reseal and exchange of cylinders, pumps and seals to OEM part number |
| HYD-MGT-306 | Hose management | Hydraulics & Hoses | Hose tagging, fitment records and change-out schedules by machine and position |
| LUB-OIL-307 | Lubrication & filtration | Hydraulics & Hoses | Hydraulic oils, greases and filters in OEM-approved grades, with contamination control |
| PPE-HED-401 | Head protection | PPE & Safety | Hard hats, bump caps and chin straps; vented and branded options; certified to the site's required standard |
| PPE-EYE-402 | Eye & face protection | PPE & Safety | Safety glasses, goggles and face shields; clear, tinted and prescription inserts |
| PPE-EAR-403 | Hearing protection | PPE & Safety | Earmuffs, cap-mounted muffs and disposable or custom-fitted plugs |
| PPE-RES-404 | Respiratory protection | PPE & Safety | Disposable and half-face respirators with filters; fit-testing service |
| PPE-WWR-405 | Workwear & hi-vis | PPE & Safety | Flame-resistant and hi-vis coveralls, jackets and vests; women's fits and site branding |
| PPE-HNF-406 | Hands & feet | PPE & Safety | Cut-, impact- and chemical-resistant gloves; safety boots in full size range |
| SFT-EQP-407 | Site safety equipment | PPE & Safety | Fall arrest, lockout/tagout, gas detectors, signage and first-aid kits by crew or area |
| EWE-ANO-501 | Lead-alloy anodes | Electrowinning Electrodes | Rolled Pb-Ca-Sn anode plates on copper or lead-clad conductive hanger bars |
| EWE-CAT-502 | Stainless steel cathodes | Electrowinning Electrodes | 316L permanent cathode blanks with copper hanger bars and edge strips |
| EWE-PMT-503 | Precious-metal electrodes | Electrowinning Electrodes | Stainless mesh and steel-wool cathodes and stainless anodes sized to cell model |
| EWE-INS-504 | Insulators & spacers | Electrowinning Electrodes | Edge strips, capping boards, bus bar insulators and anode spacers in polymer grade to suit electrolyte |
| EWE-REF-505 | Electrode refurbishment | Electrowinning Electrodes | Straightening, re-edging, hanger bar repair and re-welding, on site or in the workshop |
| CHM-XAN-601 | Xanthates | Flotation Reagents | SIBX, PAX and SEX sulphide collectors; pellet or powder |
| CHM-DTP-602 | Dithiophosphates | Flotation Reagents | Dithiophosphate secondary collectors; liquid |
| CHM-TNC-603 | Thionocarbamates | Flotation Reagents | Thionocarbamate selective copper collectors; liquid |
| CHM-FRT-604 | Frothers | Flotation Reagents | MIBC, polyglycol and alcohol-blend frothers; liquid |
| CHM-DEP-605 | Depressants | Flotation Reagents | CMC, guar and sodium silicate depressants; powder or liquid |
| CHM-ACT-606 | Activators | Flotation Reagents | Copper sulphate activator; crystal or solution |
| CHM-MOD-607 | Modifiers | Flotation Reagents | pH modifiers and dispersants; powder or liquid |
| CHM-FLC-608 | Flocculants & coagulants | Flotation Reagents | Anionic and cationic polymer flocculants and coagulants; powder or emulsion |
| GRM-FSB-701 | Forged steel balls | Grinding Media & Liners | High-carbon forged, heat-treated grinding balls; 20–150 mm |
| GRM-HCB-702 | High-chrome cast balls | Grinding Media & Liners | High-chrome cast grinding media for regrind and fine grinding |
| GRM-ROD-703 | Grinding rods | Grinding Media & Liners | Heat-treated steel grinding rods; diameter and length to mill |
| GRM-STL-704 | Steel liners | Grinding Media & Liners | Shell, head, lifter and discharge liners cast to mill drawing |
| GRM-RCL-705 | Rubber & composite liners | Grinding Media & Liners | Rubber and rubber-steel composite liner systems to mill drawing |
| GRM-WMN-706 | Wear monitoring | Grinding Media & Liners | Media consumption and liner wear profiling with monthly reporting |
| CHM-MGO-430 | Magnesium oxide (MgO) | Bulk Chemicals | Available MgO: 85–92%; high chemical reactivity; eliminates gypsum scale buildup |
| CHM-SUL-420 | Sulphur | Bulk Chemicals | Purity: >= 99.5% S; moisture <0.5%; low ash (<0.05%); uniform spherical prills |
| CHM-LME-400 | Quicklime | Bulk Chemicals | 85% to 92% available CaO; rapid slaking reactivity; pebble (6–20mm) or pulverized powder |
| CHM-LME-410 | Hydrated lime | Bulk Chemicals | Ca(OH)2 >= 90%; 98% passing 200 mesh (74 microns); consistent suspension kinetics |
| CHM-SHE-410 | Storage & handling | Bulk Chemicals | Silos, bag-breakers, slaking and dosing systems sized to consumption |
| DST-HRS-801 | Haul road suppressants | Dust Suppression | Polymer emulsion, lignin and salt-based suppressants applied by water cart or spray bar |
| DST-CRS-802 | Stockpile crusting agents | Dust Suppression | Polymer binders that form a surface crust; spray or cannon applied |
| DST-WET-803 | Wetting agents | Dust Suppression | Surfactant wetting agents for inline dosing into process water |
| DST-SPR-804 | Spray & misting systems | Dust Suppression | Fixed spray bars, misters and fog cannons; fixed or mobile |
| DST-MON-805 | Dust monitoring | Dust Suppression | Continuous particulate monitors and application records |
| TEL-SNS-901 | Sensors | Telemetry & Monitoring | Level, flow, pressure, weather and power sensors; wired or wireless; IP66–IP67 |
| TEL-NET-902 | Site networks | Telemetry & Monitoring | Long-range site networks and backhaul: LoRaWAN, radio, LTE, satellite |
| TEL-RTU-903 | Gateways & RTUs | Telemetry & Monitoring | Ruggedised gateways and RTUs; solar and battery powered |
| TEL-DSH-904 | Dashboards & alerts | Telemetry & Monitoring | Live dashboards, alarms and reports; cloud or on-premise |
| TEL-WIR-905 | WIRE integration | Telemetry & Monitoring | Telemetry merged with production data via Modbus, MQTT or OPC UA |
| FLE-GPS-1001 | GPS trackers | Fleet Tracking | Ruggedised GNSS trackers in heavy- or light-vehicle kits |
| FLE-TEL-1002 | Telematics units | Fleet Tracking | CAN / J1939 telematics units with digital and analogue inputs |
| FLE-OID-1003 | Operator ID | Fleet Tracking | RFID or card operator login at the machine; fatigue-system integration |
| FLE-PRX-1004 | Proximity & geofencing | Fleet Tracking | Speed zones, exclusion zones and in-cab or remote alerts |
| FLE-CON-1005 | Connectivity | Fleet Tracking | Vehicle-to-office data link over LTE, mesh or satellite |
| CON-WSH-1101 | Container workshops | Container Workshops | 20 ft, 40 ft or high-cube workshops with benches, tooling, lighting, power and ventilation |
| CON-STR-1102 | Stores & magazines | Container Workshops | 10 ft, 20 ft or 40 ft stores with racking, lockable doors and access control; magazines built to licensing requirements |
| CON-CRB-1103 | Crib rooms & offices | Container Workshops | 20 ft or 40 ft insulated, air-conditioned crib rooms and offices |
| CON-HSS-1104 | Hose & service stations | Container Workshops | 20 ft container pre-fitted with crimping and lube equipment |
| CON-ABL-1105 | Ablutions | Container Workshops | 20 ft or 40 ft toilet and shower units |
| SEC-ACC-1201 | Access control | Site Security | Turnstiles, boom gates, biometric and card readers linked to time and attendance |
| SEC-CTV-1202 | CCTV & video analytics | Site Security | Thermal, PTZ, ANPR and analytics cameras over fibre, radio or LTE |
| SEC-PER-1203 | Perimeter detection | Site Security | Fence sensors, radar and intrusion alarms on grid, solar or battery power |
| SEC-STO-1204 | Secure storage | Site Security | Gold rooms, safes, cages and magazines built to specification |
| SEC-MON-1205 | Security monitoring | Site Security | Control room set-up and on-site or remote monitoring |
| DST-BIO-001 | Biological Soil Stabilizer & Dust Suppressant | Dust Suppression | Organic bio-polymer matrix; reduces road watering cycles by 85–90%; UV stable |
| BLS-STM-010 | Polymer Blasthole Stemming Plugs | Drill & Blast Consumables | Injection-molded engineering polymer; withstands high detonation pressure; directs energy laterally |
| BLS-COL-020 | High-Visibility Blast Hole Collar Savers | Drill & Blast Consumables | High-visibility UV-stabilized elastomer; fits 102mm–311mm blasthole diameters |
| SFT-CON-030 | Solar-Powered Flashing Pit Delineators | PPE & Safety | Monocrystalline solar collector; 6hr daylight yields 48hr continuous flash; 360° amber LED |
| LUB-KID-100 | High-Efficiency Kidney-Loop Oil Filtration Unit | Lubrication & Oil Filtration | Sub-micron particulate removal down to ISO 14/12/9 cleanliness; moisture down to <50 ppm |
| LUB-HYD-110 | Heavy-Duty Anti-Wear Mining Hydraulic Fluid | Lubrication & Oil Filtration | ISO VG 32/46/68; Group II base oil; high anti-wear zinc additive system; DIN 51524 Part 2 |
| CTN-REL-200 | Synthetic Anti-Stick Truck Bed & Chute Release Agent | Anti-Stick Release Agents | Synthetic non-petroleum polymer film; functional from -40°C to +80°C; low surface tension |
| DRL-ROT-300 | Heavy-Duty Rotary Blasthole Drill Rig | Rotary Drilling Equipment & Consumables | 152mm to 406mm (6"–16") hole diameter; pulldown force up to 500 kN; automated pipe rack |
| DRL-TCB-310 | Tricone Rotary Drill Bits (TCI & Milled Tooth) | Rotary Drilling Equipment & Consumables | Tungsten Carbide Inserts (IADC Code 537/637); sealed journal bearings; API pin connection |
| DRL-PIP-320 | Heavy-Wall Alloy Rotary Drill Pipe & Subs | Rotary Drilling Equipment & Consumables | 4145H heat-treated alloy steel; friction-welded tool joints; milled breakout flats |
| CHM-XAN-440 | Potassium Amyl Xanthate (PAX Pellets 90%) | Flotation Reagents | Active xanthate content >= 90.0%; moisture <4.0%; free-flowing extruded pellets |
03 / Categories at a glance
Every category, its lines and indicative lead times.
| Category | Tier | Lines |
|---|---|---|
| Drill & Blast Consumables | Technical | 9 |
| Blast Design & Deviation | Technical | 6 |
| Hydraulics & Hoses | Non-Technical | 7 |
| PPE & Safety | Non-Technical | 8 |
| Electrowinning Electrodes | Technical | 5 |
| Flotation Reagents | Technical | 9 |
| Grinding Media & Liners | Non-Technical | 6 |
| Bulk Chemicals | Non-Technical | 5 |
| Dust Suppression | Non-Technical | 6 |
| Telemetry & Monitoring | Technical | 5 |
| Fleet Tracking | Technical | 5 |
| Container Workshops | Non-Technical | 5 |
| Site Security | Non-Technical | 5 |
| Rotary Drilling Equipment & Consumables | Technical | 3 |
| Lubrication & Oil Filtration | Technical | 2 |
| Anti-Stick Release Agents | Non-Technical | 1 |
04 / Browse by category
Every category, by section.
- Drill & Blast Consumables — Top-hammer and DTH drilling tools, rods and blasting accessories.
- Blast Design & Deviation — Blast design, borehole deviation surveys and post-blast measurement.
- Hydraulics & Hoses — Hydraulic hose, fittings and components for load-and-haul fleets.
- PPE & Safety — Certified PPE and site safety equipment for pit, plant and workshop crews.
- Electrowinning Electrodes — Anodes and cathodes for copper, zinc, nickel and precious-metal tankhouses.
- Flotation Reagents — Collectors, frothers, depressants and modifiers for sulphide and precious-metal flotation.
- Grinding Media & Liners — Grinding balls, rods and mill liners sized to your mill and ore.
- Bulk Chemicals — Magnesium oxide, sulphur and lime for leach, neutralisation and precipitation circuits.
- Dust Suppression — Suppressants, binders and spray systems for haul roads, stockpiles and plant.
- Telemetry & Monitoring — Sensors, networks and dashboards for water, power, tanks, weather and equipment.
- Fleet Tracking — GPS, telematics and operator ID hardware for haul, support and light vehicles.
- Container Workshops — Shipping containers fitted out as workshops, stores, crib rooms and service stations.
- Site Security — Access control, CCTV, perimeter detection and secure storage for remote mine sites.
- Rotary Drilling Equipment & Consumables — Rotary blasthole rigs, tricone bits and heavy-wall drill pipe for open-pit benches.
- Lubrication & Oil Filtration — Anti-wear hydraulic fluids and kidney-loop oil filtration for mining fleets and mills.
- Anti-Stick Release Agents — Release agents that stop carryback in truck beds, buckets and chutes.
Need one of these lines resident on site?
Our Onsite Hubs put the technical desk and the consumable stock inside your fence.